||Pegaso 3550 (1978)|
||That solder is not standing behind the VAP.
But on the side next to the cabin.
Length: 9000 width: 2500 heigth: 2830 mm
Weight: 9500 load: 3000 kg
Speed land: 87 off-road: 47 water: 10 Km/h
Fuel: 250 litre
Range land: 800 km
Behind the driver is a 3500 kg crane with a 2700 mm arm.
And for extra fun it has a 5000 kg winch.
|It is smaller than a DUKW, but it has the looks. ;-)|
|In the water it is been driven by two water jets mounted behind the rear axle.
It can turn on a dime and can move backwards at an impressive speed.
Even with a big leak it will not go down fast, the hull is divided into watertight compartments and it has 2 x 6000 l/h pumps and 2 x 3600 l/h automatic bilge pumps.The engine compartment is at the rear with the air outlet/inlet louvres and exhaust pipe mounted in the top.
|Front angle is 33° rear 27° is has 310 mm space under the hull.
If you think that this is your dream vehicle than dream on.
Al but just a hand full that are saved in museums are cut into small bits.Update:
2 incompleet vehicles are in Germany and are being very slowly restored.